BinMaster Level Control Product Specifications - CompactPro

BinMaster product sheet: Capacitance: CompactPro

The CompactPro is a compact capacitance probe for reliable level measurement and plugged chute detection in liquid, powder, granular, and pelletized materials. This probe is designed for tight quarters where proximity switches don't work. In addition, its special ProShield technology ignores the material buildup that causes proximity switches to fail.

  • Works where proximity switches don't
  • Use in tanks, bins, silos, chutes, conveyors, pipes and load out hoppers
  • Pro Shield feature ignores material buildup on vessel sidewall and probe
  • Visual LED on housing indicates sensor status
  • Simple "one-time" calibration procedure
  • Operation unaffected by temperature changes, eliminating need for recalibration
  • Compact design makes it easy to install with no routine maintenance required
  • Operation is independent of bin wall, for use on metal or non-metallic vessels
  • Four levels of static discharge protection, important for pneumatically conveyed materials
Power Requirements: 120/230 VAC 1.5 VA
Output Relay: SPDT 5 Amp at 250 VAC
-40° to +185°F (-40° to +85°C)
-40° to +240°F (-40° to +116°C)
Sensitivity Setting: Adjustable Sensitivity to < 1 Picofarad
Calibration: Multi-turn Potentiometer
Fail-Safe: Switch Selectable High/Low
Time Delay: Adjustable 1 to 30 seconds
Enclosure: NEMA 4X, Dust Tight, Water Resistant
Mounting: 1" NPS (1 ¼" NPS Adapter Available)
Status Indicator: LED Indicates Material Presence or Absence